What is Tantalum Carbide?

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net

What is it? Tantalum Carbide ?
Tantalum carbide is a light-brown metallic cubic crystal powder that belongs to the sodium-chloride type cubic crystal system. Tantalum carbid can also be used as a cemented-carbid sintered grain growth inhibiter. The density of the powder is 14.3g/cm3. Insoluble in water, insoluble with inorganic acid, soluble and decomposed in mixed acid of hydrofluoric and nitric acids. It has strong antioxidant properties and can be easily melted and broken down by potassium pyrosulfate. Superior conductivity and resistance to 30O at room temperature, with superconducting characteristics. Powder metallurgy, fine ceramics, chemicalvapor deposition, hardwear-resistant alloy cutting instruments, molds, and wear-resistant, corrosion-resistant structural components to increase the toughness and strength of alloys. Tantalum carbide can be used to make watch decorations with its sintered body. It is also available in golden yellow.
Tantalum Carbide’s main characteristics
Ceramic particles of Tantalum carbide ceramic (TaC), possess the following advantages: high melting point (3880degC), high strength (2100HV0.05), chemical stability, high electrical and thermal conductivity, as well as high chemical stability. Aluminum base and other substrates. Chao et al. The laser cladding technique was used to create a nickel-based reinforced tandemlum carbide surface composite material. Yu et.al. showed that the material’s hardness is significantly higher than pure nickel. The wear rate is also significantly lower than that in hardened steel. The relationship between in situ reaction directional solidification tantalum carbonide enhanced with base, chromium and aluminum bases and its microstructure. The results reveal that as solidification rate increases, so does the solid phase structure. Additionally, tantalum-carbidide volume fractions also change with solidification rate. Wang Wenli et al. The laser cladding technique was used to prepare an in-situ TaC alloy-enhanced nickel-based coating on A3-steel. Smooth surface with a strong metallurgical connection between the substrate and the coating. Unfortunately, very few reports have been made about the in-situ generation of TaC from steel substrates. In this experiment, we used the surface ceramic particle reinforced iron matrix composite. TaC particles are used as reinforcement particles for the second phase. The micromorphology and reaction processes of TaC particles were studied in situ for reinforced iron-based surfaces composites.
Tantalum Carbide Properties
Other Titles tantalum(IV) carbide, TaC powder
No. 12070-06-3
Combination Formula TaC
Molecular Weight 192.96
Appearance Brown to Dark Brown Powder
Melting Point 3850 degC
Boiling Point 4780-5470 degC
Density 14.3-14.7 g/cm3
Solubility of H2O Insoluble
Specific heat 36.71 J/mol*K
Thermal Conductivity 21 W/m*K
Exact 192.947996
Tantalum Carbide TaC Powder Cas 12070-06-3
Tantalum Carbide has many applications
1. Cemented carbide is used a lot as an additive. Its primary function is to improve the high-temperature strength of cemented carbide and to inhibit the growth of tungsten carbonide particles.
2. Use it as a hard coat to protect the base metal from chemical corrosion and wear.
3. It is used by the military to protect jet engine turbine blades from chemicalbook corrosion and rocket nozzles. This will significantly increase its ablation resistance and extend its service-life.
4. Because of its high electrical conductivity. Because of its good electrical conductivity, it can be used to make electrode materials and can also be used to cut complex shapes with wire EDM.
5. It is the second phase of a composite material made from particle reinforced metal matrix composite materials. This has been widely used in aerospace and metallurgy.
Tantalum Carbide’s main supplier
Tech Co., Ltd. () is a professional carbide powder Over 12 years’ experience in chemical products development and research. We accept credit cards, T/T and West Union payments. We will ship goods overseas via FedEx, DHL and by air or sea to our customers.
You can find high-quality powdered boron carbide here Please contact us Send an inquiry