Development of A New Type of Antifogging Agent for Cerium Oxide Glass

Cerium Oxide – What’s it all about?

Cerium oxide is either a pale yellow or yellowish-brown powder. The bulk density of Cerium oxide is 7.13g/cm3, and its melting point at 2397. Its boiling point at 3500 is around 3500. The substance is insoluble with water and alkali but somewhat soluble in acids. To make cerium trioxide, heat can reduce cerium oxide to 2000oC at 15MPa. Cerium oxide turns slightly yellowish or reddish if it is exposed to temperatures between 2000°C & 5MPa. It is useful for polishing, catalysts, catalyst carrier (auxiliary agents), catalysts, catalysts, catalysts, and fuel cell electrolytes.

Daily Life

Antifogging Glass Agent

Wet or rainy weather can make it easy for moisture to form on glass products like building glass, windshields, rearview lenses, spectacle lenses, and more. This is due to humidity. Water droplets that form on glass substrate in the shape of small hemispheres can cause a prism-like reflection effect. It also affects visibility and light transmittance. Fogging of glass may cause problems in people’s lives and can even pose a danger to their safety. The visibility of light transmission and mirror imaging will be affected by particles like dust or oil. This is why anti-fogging can be closely linked to both work and personal life.

People use many different methods to fix this problem. It is common to use the antifogging technique, which is simple and easily applied. A variety of solvents, surfactants, wetting agents and dispersants have been reported in antifogging agent. While this anti-fogging agents is relatively easy to make, they are difficult to lose due to water condensation on the glass. Therefore, anti-fog lasts between 2-7 days. It is not yet known if the addition of oxides to anti-fogging agents has had any impact on the results. Photocatalytic TiO2 is one of the most popular anti-fog films. Nano-titanium dioxide can diffuse small water droplets onto the glass surface and create a uniform film. This surface is not susceptible to light scattering fog. It can also maintain high transparency levels without burning. Use safely This anti-fog material is safe. It has excellent abrasion resistance.

Nano-cerium Oxide Glass Antifogging Medic

Its special surface effects and volume effects determine the special chemical properties of nanocerium oxide particles and their special effects. This includes enhancing the surface adsorption of nano-cerium oxide particles, increasing chemical reaction activity and surface active centres, as well as increasing surface activity. It also has high catalytic performances. The light it emits has both a catalytic and hydrophilic function. An ultrafine CeO2 particle can be added to anti-fogging. This will increase the agent’s surface adsorption. It also can absorb ultraviolet light which helps prevent them from rays. Finally, the CeO2 can act as a photocatalyst and can even help the organic on glass surfaces.

A new form of cerium dioxide glass anti-fogging agents with good antifogging effects, long antifogging times, stability, safety, harmless and easy production has been developed using nano-rare Earth ceriumoxid as a raw materials.

Nano-cerium Oxide

preparation process

Add a little cerium oxide to a cup of concentrated HNO3 or H2O2 to dissolve. Prepare a 0.5mol/LCeNO33 aqueous mixture and heat slowly. When the temperature reaches above 180 degrees, it will evaporate to create a brown aerogel. This is used to produce nano-CeO2 powder.

The Preparation Method Of Nano Cerium Oxide Antfogging Agent

Use appropriate dispersants and additives to combine the antifogging agent. Conduct experiments using the single factor optimization to find the most effective formula.
Advanc3dmaterials advanced materials Tech Co., Ltd (Advanc3dmaterials), a cerium powder company with 12+ years in chemical products development and research, is Advanc3dmaterials. We can provide high-quality cerium oxide powder. Please contact us to send us an enquiry.

Inquiry us